KMI SoftStep2

The controller script for the KMI Softstep 2 uses several pages which can be cycled throu using the left and right navigation buttons

the name of the current page is shown on the display and when switching between pages its also shown on the screen, so you don't have to look down to your controller panel when switching pages.

This control-script is based on the python program Foococo by Matthieu Amiguet. Many thanks for figuring out how to switch the Softstep into hostmode and controling the Screen

In this mode the buttons can be used to start and stop the current project, activate loop mode and toggle various recording modes. You can also start the device/clip/sample/preset-browser or tap your tempo.

in parameter mode you can change values of the currently selected device by usin the arrow keys on your softstep 2. Each softstep button is mapped to one parameter, the up and down key of the button can be used to increase or decrease the values by 10 and the left and right buttons can be used to increase and decrease the value by 1 - this is usefull if a parameter is mapped to a descret value like a program change on a hardware synth for example

The button number 5 can be used to switch between parameter banks on the selected devcie and button 0 is used to navigate between devices in the currently selected channel.

In controller mode the pressure value of each button is mapped to a usercontroller that can be mapped to any controllable parameter you like using the midi-learn function

in clip launcher mode, the first 9 buttons trigger start, stop or record on the first 9 clips of the selected track - the leds are lit green if a slot contains a clip. If you hit a empty clip recording starts on this slot (and the led turns red). Botton 0 is used to select a track in the mixer.